|
1.
|
|
Bijaya, A., Chowdhury, S. R. and Chowdhury, R.
Multiscale phase-field approach for investigation of anisotropic fracture properties of architected materials.
Mechanics of Materials. DOI: 10.1016/j.mechmat.2022.104528
|
|
|
2.
|
|
Bijaya, A., Chowdhury, S. R. and Chowdhury, R.
Reduced-dimensional phase-field theory for lattice fracture and its application in fracture toughness assessment of architected materials.
European Journal of Mechanics-A/Solids. DOI: 10.1016/j.euromechsol.2023.104964
|
|
|
3.
|
|
Samal, D. and Ray, S.
An improved understanding on the influence of water-cement ratio and ITZ on fracture mechanisms in concrete.
Magazine of Concrete Research. DOI: 10.1680/jmacr.22.00147
|
|
|
4.
|
|
Dubey, S. and Ray, S.
Influence of heterogeneity on size effect models and fracture characteristics of plain concrete.
Theoretical and Applied Fracture Mechanics. DOI: 10.1016/j.tafmec.2023.103993
|
|
|
5.
|
|
Gangwar, T., Susko, A. Q., Baranova, S., Guala, M., Smith, K. P. and Heuschele, D. J.
Multi-scale modelling predicts plant stem bending behaviour in response to wind to inform lodging resistance.
Royal Society Open Science. DOI: 10.1098/rsos.221410
|
|
|
6.
|
|
Paudel, S. and Paul, S.
A note on the derivation of quotient rules and their use in QR kinematics.
Acta Mechanica. DOI: 10.1007/s00707-023-03704-1
|
|
|
7.
|
|
Kumar B., Dubey S. and Ray S.
A theoretical model for the prediction of fracture process zone in concrete under fatigue loading: Energy based approach.
Mechanics of Materials. DOI: https://doi.org/10.1016/j.mechmat.2023.104850
|
|
|
8.
|
|
Bhatt, A. and Bhargava, P.
Pressure-impulse diagrams using coupled single degree of freedom systems subjected to blast load.
Asian Journal of Civil Engineering. DOI: 10.1007/s42107-023-00705-2
|
|
|
9.
|
|
Ahmad, M. S. and Bhargava, P.
Effect of different load levels on the flexure performance of RC beams exposed to fire.
Materials Today: Proceedings. DOI: 10.1016/j.matpr.2023.04.684
|
|
|
10.
|
|
Chandra, S., Sharma, U. K., Green, M., Gales, J. and Bhargava, P.
Fire Performance of Corroded Reinforced Concrete Columns.
Fire Technology. DOI: 10.1007/s10694-023-01472-x
|
|
|
11.
|
|
Tariq, F., Ahmad, S. and Bhargava, P.
Bond-slip response of corroded SD bars with recycled coarse aggregate concrete.
Structures. DOI: 10.1016/j.istruc.2023.07.019
|
|
|
12.
|
|
Mudragada, R. and Bhargava, P.
Effect of masonry infill on the response of reinforced concrete frames subject to in-plane blast loading.
Structures. DOI: 10.1016/j.istruc.2023.105317
|
|
|
13.
|
|
Mudragada, R. and Bhargava, P.
Investigation of the post-blast fire performance of RC members.
Structures. DOI: 10.1016/j.istruc.2023.105520
|
|
|
14.
|
|
V Kumar, MA Iqbal, AK Mittal
Influence of prestressing force on performance of concrete plates under impact loading.
International Journal of Protective Structures. DOI: 10.1177/2041419623118700
|
|
|
15.
|
|
Kamran, and Iqbal, M. A.
A new material model for concrete subjected to high rate of loading.
International Journal of Impact Engineering. DOI: 10.1016/j.ijimpeng.2023.104673
|
|
|
16.
|
|
Pandey, P. K., Harmukh, A., Khan, M. K., Iqbal, M. A. and Ganpule, S. G.
Ballistic response of skin simulant against fragment simulating projectiles.
Defence Technology. DOI: 10.1016/j.dt.2023.04.009
|
|
|
17.
|
|
Senthil, K., Thakur, A., Singh, A. P., Iqbal, M. A. and Gupta, N. K.
Transient dynamic response of brick masonry walls under low velocity repeated impact load.
International Journal of Impact Engineering. DOI: 10.1016/j.ijimpeng.2023.104521
|
|
|
18.
|
|
Khan, M. M. and Iqbal, M. A.
Design, development, and calibration of split Hopkinson pressure bar system for Dynamic material characterization of concrete.
International Journal of Protective Structures. DOI: 10.1177/20414196231155947
|
|
|
19.
|
|
Bisht, M. and Iqbal, M. A.
Numerical Study on Single and Multi-Layered Concrete Target Against Steel Projectile Impact.
Mechanics of Solids. DOI: 10.3103/S0025654422600982
|
|
|
20.
|
|
Khan, M. K., Iqbal, M. A. and Gupta, N. K.
Ballistic Impact Analysis of the Ceramic Metal Target.
Mechanics of Solids. DOI: 10.3103/S0025654422601471
|
|
|
21.
|
|
Rajput, A., Kaushik, A., Iqbal, M. A. and Gupta, N. K.
Non-linear FE investigation of subsurface tunnel with gfrp protection against internal blast.
International Journal of Impact Engineering. DOI: 10.1016/j.ijimpeng.2022.104423
|
|
|
22.
|
|
Khaire, N., Tiwari, G., Patel, V. and Iqbal, M. A.
Assessment of the ballistic response of honeycomb sandwich structures subjected to offset and normal impact.
Defence Technology. DOI: 10.1016/j.dt.2022.12.018
|
|
|
23.
|
|
Kumar, S., Gupta, P. K. and Iqbal, M. A.
An experimental study on the development of self-compacting, alkali-activated slag concrete mixes using industrial by-products under ambient curing.
Materials Today: Proceedings. DOI: 10.1016/j.matpr.2023.04.396
|
|
|
24.
|
|
Sharma, A., Ray, S. and Iqbal, M. A.
Characterization of fracture development in geometrical similar ultra-high-performance concrete (UHPC) beams using acoustic emission (AE) technique.
Materials Today: Proceedings. DOI: 10.1016/j.matpr.2023.03.691
|
|
|
25.
|
|
Bisht, M., Iqbal, M. A., Kamran, K., Bratov, V. and Morozov, N. F.
Numerical study of thin UHPC targets response against ballistic impact.
Materials Physics & Mechanics. DOI: 10.18149/MPM.5012022_6
|
|
|
26.
|
|
Gangwar, T. and Schillinger, D.
Thermodynamically consistent concurrent material and structure optimization of elastoplastic multiphase hierarchical systems.
Structural and Multidisciplinary Optimization. DOI: 10.1007/s00158-023-03648-z
|
|
|
27.
|
|
Ebrahem, A., Jessen, E., Eikelder, M. F. P., Gangwar, T. Mika, M. and Schillinger, D.
Connecting continuum poroelasticity with discrete synthetic vascular trees for modelling liver tissue.
Proceedings of the Royal Society A. DOI: 10.48550/arXiv.2306.07412
|
|
|
28.
|
|
Anwarbasha, G. T. M. N. Chakrabarti, A., Bahrami, A. Venkatesan, V., Vikram, A. S. V., Subramanian, J. and Mahesh, V.
Efficient Finite Element Approach to Four-Variable Power-Law Functionally Graded Plates.
Buildings. DOI: 10.3390/buildings13102577
|
|
|
29.
|
|
Chauhan, B. S., Ahuja, A. K. and Chakrabarti, A.
Study of variation in wind loads on rectangular cross-section tall building due to change in location of interfering buildings.
Arabian Journal for Science and Engineering. DOI: 10.1007/s13369-022-07582-y
|
|
|
30.
|
|
Padhi, A. P., Chakraborty, S., Chakrabarti, C. and Chowdhury, C.
Efficient hybrid topology optimization using GPU and homogenization-based multigrid approach.
Engineering with Computers. DOI: 10.1007/s00366-022-01771-x
|
|
|
31.
|
|
Verma, P., Chowdhury, R. and Chakrabarti, A.
Effect of adding highly reduced graphene oxide (rgo) nanosheets based nanomaterial on cement composites.
Materials Today: Proceedings. DOI: 10.1016/j.matpr.2023.03.616
|
|
|
32.
|
|
Maurya, M. C., Jawaid, S. M. and Chakrabarti, A.
Free vibration response of agglomerated carbon nanotube-reinforced nanocomposite plates.
Mechanics Of Advanced Composite Structures. DOI: 10.22075/MACS.2022.28148.1430
|
|
|
33.
|
|
Maurya, M. C., Jawaid, S. M. and Chakrabarti, A.
Flexural behaviour of nanocomposite plate with CNT distribution and agglomeration effect.
Mechanics of Advanced Composite Structures. DOI: 10.22075/MACS.2022.28078.1426
|
|
|
34.
|
|
Verma, P., Chowdhury, R. and Chakrabarti, A.
Early strength development of cement composites using nano-calcium silicate hydrate (CSH) based hardening accelerator.
Materials Today: Proceedings.
|
|
|
35.
|
|
Saurabh, S., Gupta, A. and Chowdhury, R.
Impact of parametric variation to achieve extreme mechanical metamaterials through topology optimization.
Composite Structures. DOI: 10.1016/j.compstruct.2023.117611
|
|
|
36.
|
|
Karuthedath, P. L., Gupta, A., Mamindlapelly, B. and Chowdhury, R.
A continuous field adaptive mesh refinement algorithm for isogeometric topology optimization using PHT-Splines.
Computer Methods in Applied Mechanics and Engineering. DOI: 10.1016/j.cma.2023.116075
|
|